Red And Silver Pp Aluminum Alloy 1.75m Lawn Trimmer 35.88cc Four-Stroke Lawn Mower Multifunctional Hedge Trimmer

<p>Details</p> <p>Large Fuel Tank: The 22&amp;2.7 oz fuel tanks ensure long-term use without frequent refueling.</p> <p>&nbsp;</p> <p>Grass Baffle: It can effectively prevent the broken grass from splashing around when mowing the lawn, thus making it easier to clean up the lawn after mowing and ensuring your safety.</p> <p>&nbsp;</p> <p>Funnel:&nbsp;The red funnel makes it easier to add fuel and less likely to leak.</p> <p>&nbsp;</p> <p>Starting Method</p> <p>1. Just add four-stroke gasoline&nbsp;engine oil to the oil tank to the bottom thread.</p> <p>2. Add 93 unleaded gasoline&nbsp;to the fuel tank.</p> <p>3. Press the oil bubble to pump oil until the oil bubble is full of fuel and the fuel return pipe returns oil.</p> <p>4. Put the flameout switch in the "I" position (0 for flameout, I for start).</p> <p>5. Toggle the damper upward to close the damper (hot start does not need to close the damper).</p> <p>6. Pull the starter puller at a constant speed until it starts (if there is a start response after pulling 5 times but it fails to start, please pull the damper to the following to open the damper in pulling).</p> <p>7. After the engine starts, pull the damper to the bottom to open the damper, slowly pull the throttle trigger, lightly add oil to the throttle and test whether it is normal.</p> <p>&nbsp;</p> <p>Specification</p> <p>Color: Red, Silver</p> <p>Material: PP, Aluminum Alloy, Manganese Steel, Nylon</p> <p>Assembly Required: Yes</p> <p>Usage: Side-mounted</p> <p>Displacement: 35.88CC</p> <p>Power: 0.75kw</p> <p>Rotation Speed: 8500r/min </p> <p>Idling Speed: 2800-3000r/min &nbsp;</p> <p>Engine Type: 4-stroke Gasoline&nbsp;Engine </p> <p>Carburetor Type: Diaphragm Carburetor</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>Gasoline&nbsp;Tank Volume: 650ml/22 Oz</p> <p>Oil Tank Volume: 80ml/2.7 Oz</p> <p>Engine Size: 26*22*27cm/10.24*8.66*10.63in</p> <p>Product Length: 1.75m/5.74ft</p> <p>Gross Weight: 8.5kg/18.74&nbsp;lbs </p> <p>Package Size:105*25*25 cm/41.34*9.84*9.84&nbsp;in</p> <p>&nbsp;</p> <p>Package Included</p> <p>1 * Weed Wacker</p> <p>1 * Oil Pot</p> <p>1 * Funnel</p> <p>1 Pair* Goggles&nbsp;</p> <p>1 * Carrying Strap</p> <p>1 * English Manual</p> <p>All Accessories for Installation</p> <p>&nbsp;</p> <p>Notes</p> <p>1. Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use. &nbsp;&nbsp;&nbsp;</p> <p>2. Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.</p> <p>3. Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.</p> <p>4. Work Check:</p> <p>Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.</p> <p>Please check daily whether the air filter is too dirty. Please use pure gasoline&nbsp;to clean the air filter sponge.</p> <p>Please check whether the throttle cable is stable in the carburetor position before work.</p> <p>Please check whether the blade is in good condition before work, and do not use a damaged blade. </p> <p>Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.</p> <p>Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.</p>

• Sturdy and Durable: This rotatable gas pole saw grass trimmer is mainly made of PP, aluminum alloy, manganese steel, and nylon, with high hardness, high abrasion resistance, anti-corrosion, anti-rust performance, and long service life.
• High Power: The high-quality engine with 35.88CC displacement and power up to 0.75kw provides the rotatable gas pole saw grass trimmer with super high speed (8500r/min ), thus effectively improving your working efficiency.
• High Comfort: The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. The adjustable position of the handle allows you to control its direction freely and conveniently, thus making mowing easier and more precise.
• Efficient Heat Dissipation: The multiple heat dissipation holes on the engine can effectively speed up the heat dissipation inside the engine, thus guaranteeing the efficient and smooth running of the engine.he throttle safety lock prevents accidental touching of the accelerating throttle and causing an accident to ensure the safety of users during operation.
• Simple Assembly: Thanks to the long pole with a fastener design, complete installation components, and a detailed English manual, you can assemble this product or replace the blade heads easily and quickly.The carrying strap allows for easy carrying while lightening the load on your hands. Its detachable design ensures convenient storage when not in use.